How We Laid a Big Oak Down in the Road on a Hayesville, NC Tree Job

One big oak, a bull rope, a skid steer and a plan. Here is how a tree comes down on purpose, right where we want it.

5 min read

Our work · Hayesville, NC
ALC OutdoorsOwner-led by Shawn Gallagher. 25+ years of outdoor work around Lake Chatuge.
Talk to usCall (678) 965-9616 or text (678) 599-4441→

Short summary

  • We were in Hayesville, NC and had already taken out about 10 trees that day when it was the big oak’s turn.
  • The oak had a little lean the way we wanted it to go, so we tied a bull rope to it and to the skid steer to guide it.
  • We laid it in the road on purpose. Flat, open ground is the safest place to cut a tree up and feed the chipper.

Some trees are easy. This one was big. It was a big oak on a job in Hayesville, NC, right beside a road, with a lodge behind it and plenty of things we did not want it to land on.

Good news: a tree like that does not have to be a guess. With the right plan it goes exactly where you point it. Here is how that day went, step by step.

First, the plan. Then the saw.

By the time we got to the oak, we had already taken out about 10 trees on the property. Shawn said it plain on camera that morning: “We got this big oak that we’re gonna bring down, and we’re gonna lay it out here in the road.”

The big oakShawn on the job in Hayesville. Tap to watch with sound.

Why the road? Because a road is flat, open and hard. There is room for the whole tree to lie down. There is room for the machines to work. And nothing is in the way. A tree that lands in a tidy spot is a tree you can clean up fast.

Read the lean before you touch the tree

Every tree leans a little. It might be the trunk, or it might be a heavy side of the crown. That lean is the tree telling you where it would like to go.

This oak was kind to us. As Shawn put it, “This tree’s got a little bit of lean to it in the direction we want to go.” That is the best case. The tree and the crew agree.

When a tree leans the wrong way, toward a house or a line, the job changes. It may need to come down in pieces from the top instead of in one go. That is a different day, with different gear. Knowing which day you are having is most of the skill.

The big oak falling into the road on the Hayesville NC tree job

Our work Scroll to bring it down

The oak, start to finish.

  1. 01The last cuts are done. Everyone is clear, and the rope is tight.
  2. 02The crown starts to move. It goes the way the lean and the rope both point.
  3. 03Down in the road, right where we said. Now the clean-up can start.

The bull rope and the skid steer

A lean is a hint. A rope is a promise. So even with a helpful lean, we did not leave it to luck.

We put a bull rope in the tree. That is a thick, strong rope made for this kind of work. The other end went to the skid steer sitting out in the road. Then the machine eased back and took up the slack, just enough to put a little tension on the tree.

Shawn again: “We’re gonna pull it and give a little tension to it to guide it, just to be safe and make sure that we don’t have no mishaps.” The rope is not there to yank the tree over. It is there so the tree has one choice, and it is the right one.

Bull rope tied around the trunk of the oak while Shawn makes his cut
Our workThe rope goes around the trunk.
Bull rope pulled tight at the skid steer grapple in the road
Our workThe other end, tight at the machine.
Shawn, on the job in Hayesville

We want to place things safe.

How we lay a tree downShawn walks through the plan for the oak. Tap to watch with sound.

How a tree gets steered

Here is the simple version of how felling works, for any tree and any crew. A tree is steered by the wood you leave, not just the wood you cut.

  • The face cut. A notch goes in on the side facing the landing spot. It gives the tree a place to fold.
  • The back cut. A second cut comes in from behind, a little above the notch.
  • The hinge. A strip of uncut wood is left between the two. It works like a door hinge and holds the tree on line as it tips.
  • The way out. Before any of that, the person on the saw picks a clear path to walk away on.

Add a tight rope pulling the same way, and the tree has a lean, a hinge and a pull all telling it the same thing. That is why this is a job for people who do it every week. The saw is the loud part. The thinking is the important part.

From the job

The whole morning, one clip at a time.

Our own footage from the Hayesville job: the oak, the rope, the skid steer, the fall, and Lake Chatuge just over the trees.

Down in the road, on purpose

Then it went. The crown tipped, the trunk followed, and the whole oak laid down across the road in a big puff of dust. Right on the spot.

From the air you can see how neat it is. One long trunk, straight across the pavement, with the crew already walking in. No roof under it. No fence under it. Just a road, which does not mind.

From the airThe Hayesville job from the drone. Tap to watch with sound.

And here is the part folks do not see coming. The fall is the short part of the day. The trunk gets cut up. The top, which crews call the head, goes through the chipper. We wrote a whole story about that half of the job, and where all that wood ends up.

Tree work around Hayesville and the lake

This job was in Hayesville, but the lots look a lot alike all around Lake Chatuge. Big hardwoods. Steep ground. A road, a house and the water all close together. We see it out toward Tusquittee and Shooting Creek, down by Elf near the lake, and on the hills above the old courthouse square in town.

It is the same story off US-64 and down NC-69 toward the Georgia line, and across the water near the Chatuge Dam and Jackrabbit Mountain. Pretty trees, tight spaces. That is exactly where a plan matters most.

Shawn ended his video the way he ends most things: “If you need any tree work done, give us a call.” We will come look, tell you straight what we see, and make a plan that puts the tree where it belongs.

Questions people ask

Why would you drop a tree in the road?

On this job the road was the flattest, most open spot on the lot. A tree that lands on open ground is safer to cut up and faster to clean up than one that lands in brush or on a slope.

What is a bull rope?

It is a thick, strong rope used in tree work. On this job we tied it to the oak and to the skid steer, then put a little tension on it so the tree was guided the way we wanted it to fall.

Can every tree be dropped in one piece?

No. It depends on the lean, the size of the tree and what is around it. Some trees need to come down in sections instead. We look at each one before we decide.

Do you work in Hayesville, NC?

Yes. This job was in Hayesville. We are based in Hiawassee, GA and work around Lake Chatuge, including Hayesville, Young Harris and nearby.

Around Lake Chatuge · Hiawassee, Young Harris, Hayesville

Got a tree that needs to come down?

Big oak by the road, a leaner over the house, or a whole lot to open up. Call the office or text the cell and we will come take a look.

Call the office or text the cell. A couple of photos of your yard help us help you faster.