What Happens to the Tree After It Falls? A Day on a Hayesville, NC Removal
The fall takes a few seconds. The clean-up is the real job. Here is where the brush, the logs and the stump all go.
Short summary
- On our Hayesville, NC job the crew took out about 10 trees in a day, so clean-up had to keep pace with the cutting.
- Brush and tops went through the chipper. A mini excavator and a skid steer with a grapple did the heavy lifting.
- The good logs were cut up and taken back to the shop to sell as firewood.
Everybody loves the part where the tree falls. It is loud, it is fast, and it makes a great video. Then the dust settles and there is a whole tree lying on the ground. Now what?
That “now what” is most of a tree job. On our Hayesville, NC job the crew took out about 10 trees in one day. That is a lot of limbs, a lot of logs and a lot of leaves. Here is how it all gets handled, so the lot ends up clean and not just cut.
A tree is three piles
Once a tree is down, we stop seeing a tree. We see three piles.
- The head. That is the top: small limbs, twigs and leaves. It is bulky and light. It goes to the chipper.
- The wood. The trunk and the big limbs. Heavy, straight and worth keeping.
- The stump. The part still in the ground, which gets its own plan.
Sorting it that way keeps the job moving. Nobody stands around wondering what to do with a branch. It is a head, so it goes to the chipper. Easy.
The saws come first
A sharp chain does better work and safer work. So before the cutting, there is a file on the chain, right at the truck. It is a small thing, and it makes every cut after it easier.
Then the crew works down the trunk, taking the limbs off one at a time. Tree folks call the cutting-to-length part bucking. The goal is simple: pieces small enough to carry or grab, and a clear trunk ready to be cut into logs.
Chop it. Chip it. Haul it.
Where it all goes
Brush goes in, chips come out
The chipper is the hungriest thing on the job. Ours on this day was a Bandit, parked right on the road where the oak came down. Brush goes in one end. Wood chips blow out the other.
Shawn explained the plan before the tree even fell: lay it in the road “so that we can chop it up and feed it into the chipper, get all the head in it.” Having the tree on flat, open ground meant the machines could drive right up to it.
- 01The mini excavatorA John Deere mini excavator picked up tangles of brush and carried them to the chipper, so nobody had to drag them by hand.
- 02The skid steerA skid steer with a grapple on the front grabbed the bigger pieces and moved them where they needed to go.
- 03The chipperA whole treetop turns into a neat pile of chips. A lot less to haul than loose brush.
- 04The crewHi-vis shirts and helmets, feeding the chipper at a steady pace.
The logs get a second life
Now for the good wood. Oak is heavy, and a big trunk is not something you carry. The excavator picked up whole logs and set them where the saws could reach, then loaded them out.
And here is the nice part. It does not go to waste. In Shawn’s words: “The rest of it we’re gonna cut up, take back to the shop, sell for firewood.” Then he added, like any good neighbor would, “So if anybody knows, we got firewood for sale.”

Oak is a favorite for burning because it is dense and burns a long time. Like any firewood, it needs time to dry out before it burns well. So a tree that had to come down this fall becomes somebody’s warm living room down the road. We like that.
The fall takes seconds. The clean-up is the job.

Sharpen
A file on the chain, right at the truck. Sharp tools cut clean.

Chip
Tops and brush go through the chipper and leave as chips.

Carry
The excavator moves the logs. They get cut up and head to the shop for firewood.

Stump
The stump is cut down low so the spot is neat and safe to walk.
What about the stump?
A stump is the last thing left and the first thing people trip on. On this job the crew cut the big stump down in rounds, with the excavator working right beside it.
What happens next depends on what you want the spot to be. If it is going to be woods, a low stump is fine. If it is going to be lawn, a driveway or a patio, the stump needs to be dealt with so the ground is ready. Tell us the plan for the spot and we will tell you the best way to handle it.
Clean lots around Hayesville
Around Hayesville, a tree job is rarely just a tree job. It is a tree job next to a driveway, above a garden, or a few steps from the lake. Lots in Sweetwater, out near Warne and Brasstown, and around the coves by the Clay County Recreation Park all share that. There is not much flat ground, so you have to be smart about where the mess goes.
That is why we bring the machines. On this job the chipper sat on the hard road, which keeps ruts out of the yard. From NC-175 along the east side of the lake to the streets near the historic courthouse in town, the plan is the same: take it down safe, then leave it clean.
If you have trees that need to go, call us. We will walk the lot with you, point at what we see, and tell you exactly what it will look like when we pull away.
Questions people ask
Do you haul off the brush?
On this Hayesville job the brush and tops went through our chipper on site, and the logs were cut up and hauled back to the shop. We will tell you up front how your job will be cleaned up.
What happens to the wood?
On this job the good logs were cut up, taken back to the shop and sold as firewood. If you would like to keep wood from your own tree, just tell us before we start.
Do you sell firewood?
Shawn said it himself on this job: “We got firewood for sale.” Call the office at (678) 965-9616 to ask what is on hand.
What equipment do you bring?
It depends on the job. On this one we had a John Deere mini excavator, a skid steer with a grapple, a Bandit chipper and saws.
Around Lake Chatuge · Hiawassee, Young Harris, Hayesville
Need trees gone and the mess gone too?
One tree or a whole lot, we take it down, chip the brush and haul the wood. Call the office or text the cell.
Call the office or text the cell. A couple of photos of your yard help us help you faster.